SOLAR POWERED WATER PUMP
▲This product is a solar direct driving pump without additional battery, the height of the water depends on the strength of the sunlight. When the sunlight is weak, the pump will not work continuously, but it will start automatically and repeatedly. If the sunlight is strong enough, the pump will work properly. Please place the pump in full sunlight, otherwise the pump will not work properly.
▲Product can float on the water. Do not need the external power supply. The Pump must be immersed in the water completely. Insert the nozzle after the pump work normally as there could be air in the pump.
▲Easy to install, Easy to operate. As long as there is direct sunlight, the pump will be able to start work. Keep water clean and clean up the pump regularly in case the pump break down caused by any foreign matter.
WIDE RANGE OF APPLICATIONS
▲Widely used in garden decoration, birdbaths, small pond water circulation oxygen, rockery fountains and other places. Please use a length suitable thread to fasten the sucker to the pump to avoid the fountain drifting back and forth.
▲1. Remove the film which covers the solar panel before using
▲2. Make sure there is no leaf or anything else shade a part of solar panel
▲3. Ensure the pump under the enough sunshine, suggested in the midday sunshine
▲4. Pull out of the plug, the head part firstly, and make the pump work for seconds to let the air go out of the pump
▲5. Then put on the plug to see if it could work well.